The Open University skip to content Accessibility

Materials Engineering
 


Research>Publications>Dr. S. Gungor

Publications - Dr. S. Gungor

 

Research Publications

 

Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E. (2010). Effect of prior cold work on the mechanical properties of weldments. In: Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 7-10 Jun 2010, Indianapolis, Indiana, USA.

Sefton, D. E.; Rist, M. A. and Gungor, S. (2009). Rate-dependent deformation of Sn–3.5Ag lead-free solder. Journal of Materials Science: Materials in Electronics, 20(11), pp. 1083–1089.

Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E. (2009). Variation of mechanical properties in a multi-pass weld measured using digital image correlation. In: Society of Experimental Mechanics Annual Conference on Experimental and Applied Mechanics 2009, 1-4 Jun 2009, Albuquerque, New Mexico, USA.

Kartal, M. E.; Liljedahl, C. D. M.; Gungor, S.; Edwards, L. and Fitzpatrick, M. E. (2008). Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method. Acta Materialia, 56(16), pp. 4417–4428.

Kartal M., Molak R., Turski M., Gungor S., Fitzpatrick M. E. and Edwards L. (2007) “Determination of Weld Metal Mechanical Properties Utilising Novel Tensile Testing Methods” Applied Mechanics and Materials , 7-8 . pp. 127-132.

Molak R., Kartal M., Kalinowski, A., Pakiela, Z., Manaj, W., Turski M., Hiller S., Gungor S., Edwards L. and Kurzydlowski K.J. (2007) “Use of micro tensile test samples in determining the remnant life of pressure vessel steels”, Applied Mechanics and Materials , 7-8 . pp. 187-194.

Kartal M., Turski M, Johnson G, Fitzpatrick ME, Gungor S, Withers PJ, Edwards L. (2006) “Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method” Materials Science Forum , 524-525 . pp. 671-676.

Gungor S (2002) "Residual stress measurements in fibre reinforced titanium alloy composites", Acta Mater. , 50 , 2053-2073.

Fellows L.J. and S. Gungor (1998) “Fabrication of photoresist diffraction gratings on Ti-6Al-4V beam specimens for use in moiré interferometry", Measurement Science and Technology, 9 , 1963-1968.

Gungor S. and L. J. Fellows (1998) "Combined fatigue rig and moiré interferometer to measure crack closure" 11th Int. Conference on Experimental Mechanics (ICEM 98) – Advances in Design, Testing and Analysis , 24-28 August 1998, Oxford, UK, 1071-1076.

Ruiz C., S. R. Hallett and S. Gungor (1998) "Application of fracture mechanics criteria to laminated CFRP beams under impact" European conference on composite materials (ECCM-8) , 3-6 June 1998, Naples, Italy.

Gungor S. and E. A. Patterson (1997) "A photoelastic determination of stress intensity factors of corner cracks in bolted joints", J. Offshore Mech. & Arctic Eng. , 119 , 276-280.

E. A. Patterson and S. Gungor (1997) "A photoelastic study of an angle crack specimen subject to mixed mode I-III displacements", Engineering Fracture Mechanics , 56 , 6, 767-778.

Gungor S. and C. Ruiz (1996) "Measurement of thermal residual stresses in continuous fibre composites" Ceramic and Metal Matrix Composites - CMMC 96 , , San Sebastián, Spain; Key Engineering Materials , 127-131 , pp.851-859.

Gungor S., A. D. Nurse and E. A. Patterson (1996) "Experimental determination of stress intensity factors of cracks in stiffened sheet structures", Engineering Fracture Mechanics, 53 , 4, 561-569.

Nurse A.D., S. Gungor and E. A Patterson (1995) "Experimental stress intensity factors for cracks in a thin plate with stiffeners", J. Strain Analysis , 20 , 3, 235-240.

Gungor S. and E. A. Patterson (1994) "Experimental evaluation of stress intensity factors for corner cracks in bolted joints" 13th Int. Conference on Offshore Mechanics and Arctic Engineering (OMAE 1994) , eds: M.M.Salama, et al., 27 Feb.-3 Mar. 1994, Houston, Texas, 3 , pp.243-247.

Wallhead I.R., S. Gungor and L. Edwards (1994) "Optimisation of the optical method of caustics for the determination of stress intensity factors", Optics and Lasers in Engineering , 20 , 109-133.

Gungor S. and L. Edwards (1993) "Effect of surface texture on fatigue life in a squeeze-cast 6082 aluminium alloy", Fatigue & Fracture of Eng. Mater. Struct. , 16 , 4, 391-403.

Gungor S. and L. Edwards (1993) "Effect of surface texture on the initiation and propagation of small fatigue cracks in a forged 6082 aluminium alloy", Mater. Sci. Eng . , A160 , 1, 17-24.

Wallhead I.R., S. Gungor and L. Edwards (1993) "Characterization of fatigue crack growth using the optical method of caustics" Fatigue 93 - The 5th Int. Conference on Fatigue and Fatigue Thresholds , May 3-7, 1993, Montréal, Canada, vol. 3 , pp.1863-1868.

Gungor S., I. R. Wallhead and L. Edwards (1992) "Application of the optical method of caustics to fatigue crack growth" Proceedings of the Int. Symposium on Non-Destructive Testing & Stress-Strain Measurement, & FENDT '92 , October 12-14, 1992, Tokyo, Japan, Vol. 2 , p.598.

Edwards L. and S. Gungor (1992) "Predicting Fatigue Life in Aluminium Alloys Using Short Crack Growth Data" Short Fatigue Cracks , ESIS 13 (Edited by K. J. Miller and E. R. de los Rios), 1992, Mechanical Engineering Publications, London, pp. 469-483.

Edwards L. and S. Gungor (1991) "The Use of Short Crack Growth Data to Predict Fatigue Life in Aluminium Alloys" Proceedings of the Sixth International Conference on Mechanical Behaviour of Materials , 29 July - 2 August, 1991, Kyoto, Japan, Vol. 4 , p.325

Gungor S. and L. Edwards (1990) "Effect of Surface Texture on Small Fatigue Crack Growth in a Forged 6082 Aluminium Alloy" Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds (Fatigue'90) , 15-20 July 1990, Honolulu, Hawaii. Materials and Component Engineering Publications Ltd. ( Birmingham , U.K. ), Vol 2 , p.1073.

Gungor S. and L. Edwards (1989) "The Effect of Slip Distribution on the Growth of Small Fatigue Cracks in Al-Mg-Si Alloys" Proceedings of 7th International Conference on Fracture (ICF7) , 20-24 March 1989, Houston , Texas . Pergamon Press ( Oxford ), Vol 2 , p.244

Gungor S. and S. Bor (1986) "Determination of Fatigue Limit by Accelerated Testing in Carburized Steels" Proceedings of the 4th National Metallurgy Conference , MTA, Ankara, 22-25 October 1986, vol. I , p.392

Gungor S and S. Bor (1986) "Determination of Fatigue Limit in Surface Hardened Steels by Accelerated Fatigue Testing" Proceedings of the 2nd Congress on Machine Design and Manufacture , METU, Ankara, 17-19 September 1986, p.371.


back to the top^