The Open University skip to content Accessibility

Materials Engineering Group
 

 

Research>Publications>Prof. M. Fitzpatrick

Publications

Prof. Mike Fitzpatrick

Professor Fitzpatrick's publications are listed at http://oro.open.ac.uk/view/person/mef5.html
with links to each publication. A full publications list including
all book sections and conference papers is given below

 

Edited Book

M. E. Fitzpatrick and A. Lodini, (eds.) Analysis of Residual Stress Using Neutron and Synchrotron Radiation . Taylor & Francis, London, 2003.

Chapters in Book

  1. M. E. Fitzpatrick. ‘Composite Materials', in Analysis of Residual Stress using Neutron and Synchrotron Radiation, M. E. Fitzpatrick and A. Lodini, Eds. London: Taylor & Francis, 2003, pp. 263-278.

  2. P. J. Withers, A. P. Clarke and M. E. Fitzpatrick. ‘Internal Stress Considerations During Crack Growth in Al/SiC Particulate Composites', in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems, J. J. Lewandowski and J. W. H. Hunt, Eds. Warrendale, PA: TMS, 1995, pp. 49-56.

  3. M. E. Fitzpatrick. ‘Advanced Composite Materials', in European Summer School on Advanced and New Materials , A. Lodini and M. Nicoara, eds. Timisoara, Romania, Editura Politechnica, 2008, ISBN 978-973-625-407-9, pp. 118-126.

back to the top^

Refereed Journal Articles

  1. 1. M. E. Fitzpatrick, M. T. Hutchings, J. E. King, D. M. Knowles and P. J. Withers. ‘Effect of Thermal Residual Stresses on Fatigue Crack Opening and Propagation Behaviour in an Al/SiC p Metal Matrix Composite'. Metall. Mater. Trans . 1995:26A; 3191-3198.
  2. M. E. Fitzpatrick, M. T. Hutchings and P. J. Withers. ‘The Determination of the Profile of Macrostress and Thermal Mismatch Stress Through an Al/SiCp Composite Plate from the Average Residual Strains Measured in Each Phase'. Physica B 1995:213; 790-792.
  3. H. Y. Ahmad, M. E. Fitzpatrick, I. R. Wallhead and L. Edwards. ‘Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading'. J. Adhesion 1996:56; 187-203.
  4. M. E. Fitzpatrick, D. Bhattacharjee, A. M. Cree and C. R. S. Daykin. ‘Is Fatigue Surface Roughness a Sufficient Condition for the Generation of Crack Closure?' Scripta Mater. 1996:35(11):1335-1340.
  5. M. E. Fitzpatrick, M. T. Hutchings and P. J. Withers. ‘Separation of Macroscopic, Elastic Mismatch and Thermal Expansion Misfit Stresses in Metal Matrix Composite Quenched Plates from Neutron Diffraction Measurements'. Acta Mater. 1997:45(12):4867-4876.
  6. H. Y. Ahmad, M. E. Fitzpatrick and L. Edwards. ‘Discussion on "the Method of Caustics in Conjunction with the Method of Birefringent Coating for the Solution of Fracture Mechanics Problems"'. Int. J. Fract. 1997:87(4):L97-L99.
  7. M. E. Fitzpatrick and L. Edwards. ‘Fatigue Crack / Residual Stress Interactions and their Implications for Damage Tolerant Design'. J. Mater. Engng Performance 1998:7(2):190-198.
  8. M. E. Fitzpatrick, M. Dutta and L. Edwards. ‘Determination by neutron diffraction of effect of plasticity on crack tip strains in a metal matrix composite'. Mater. Sci. Technol. 1998:14; 980-986.
  9. F. Turquier, S. V. Hainsworth, M. E. Fitzpatrick and A. Lodini. ‘Development of a Thermal Barrier Coating Resistant to Repeated Thermal Shocks in Liquid Aluminium'. Le Vide: Science, Technique et Applications 1999: 291; 312-314.
  10. M. E. Fitzpatrick, M. T. Hutchings and P. J. Withers. ‘Separation of Measured Fatigue Crack Stress Fields in a Metal Matrix Composite Material'. Acta Mater. 1999:47(2):585-593.
  11. R. Levy-Tubiana, A. Baczmanski, M. Ceretti, M. Fitzpatrick, A. Lodini and K. Wierzbanowski. ‘Study of Phase Stresses in an Al/SiC Metal Matrix Composite'. Materials Science Forum 2000:Vol 347-9, pp. 510-515.
  12. A. Bouzina, M. J. Balart, L. Edwards and M. E. Fitzpatrick. ‘Measurement of Grinding Stresses with a Combination of Neutron and X-Ray Diffraction'. J. Neutron Res . 2001:9(2-4):167-171.
  13. M. T. Hutchings, M. E. Fitzpatrick, P. J. Withers, A. Baczmanski, R. Levy, M. Ceretti and A. Lodini. ‘Effect of Plastic Flow on the Misfit Stresses in an Al/SiC p Metal Matrix Composite'. Materials Science Research International . May 2001:431-434.
  14. S. Johansson and M. E. Fitzpatrick. ‘Errors in Crack Closure Measurements Caused by Flexure Test Fixture Support Effects'. Experimental Mechanics 2001:41(1):47-51.
  15. A. Ben Rhouma, C. Braham, M. E. Fitzpatrick, J. Lédion and H. Sidhom. ‘Effects of Surface Preparation on Pitting Resistance, Residual Stress, and Stress Corrosion Cracking in Austenitic Stainless Steels'. J. Mater. Engng Performance 2001:10(5):507-514.
  16. D. Stefanescu, A. Bouzina, M. Dutta, D. Q. Wang, M. E. Fitzpatrick and L. Edwards. ‘Comparison of Residual Stress Measurements using Neutron and X-ray Diffraction Around Cold Expanded Holes'. J. Neutron Res. 2001:9(2-4):399-403.
  17. A. Steuwer, P. J. Withers, J. R. Santisteban, L. Edwards, G. Bruno, M. E. Fitzpatrick, M. R. Daymond, M. W. Johnson and D. Wang. ‘Bragg edge determination for accurate lattice parameter and elastic strain measurement'. Phys. Stat. Sol. A 2001:185(2):221-230.
  18. A. Steuwer, P. J. Withers, J. R. Santisteban, L. Edwards, M. E. Fitzpatrick, M. R. Daymond and M. W. Johnson. ‘The Sin 2 -psi Method in Pulsed Neutron Transmission'. J. Neutron Res. 2001:9(2-4):289-294.
  19. M. R. Daymond and M. E. Fitzpatrick. ‘Effect of cyclic loading on strain distribution in a particulate-reinforced metal matrix composite'. Materials Science Forum 2002:404/407:541-546.
  20. M. E. Fitzpatrick, P. J. Withers, A. Baczmanski, M. T. Hutchings, R. Levy, M. Ceretti and A. Lodini. ‘Changes in the misfit stresses in an Al/SiC p metal matrix composite under plastic strain'. Acta Mater. 2002:50(5):1031-1040.
  21. J. R. Santisteban, L. Edwards, M. E. Fitzpatrick, A. Steuwer, P. J. Withers, M. R. Daymond, M. W. Johnson, N. Rhodes and E. M. Schooneveld. ‘Strain imaging by Bragg edge neutron transmission'. Nuclear Instr. & Methods in Phys Res. 2002:A481: 765-768
  22. J. R. Santisteban, A. Steuwer, L. Edwards, P. J. Withers and M. E. Fitzpatrick. ‘Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction'. J. Applied Crystallography . 2002:35(4): 497-504.
  23. D. Stefanescu, L. Edwards and M. E. Fitzpatrick. ‘X- Ray Diffraction Measurement of the Residual Stresses Surrounding a Cold Expanded Hole'. Materials Science Forum 2002:404/407:185-190.
  24. V. Stelmukh, L. Edwards, J. R. Santisteban, S. Ganguly and M.E. Fitzpatrick, ‘Weld Stress Mapping Using Neutron and Synchrotron X-ray Diffraction'. Materials Science Forum 2002:404/407:599-604.
  25. L. W. Wei, L. Edwards and M. E. Fitzpatrick. ‘FE analysis of stresses and stress intensity factors of interfacial cracks in a CTS specimen'. Engng Fracture Mechanics 2002:69(1):85-90.
  26. Y. Zhang, M. E. Fitzpatrick and L. Edwards. ‘Measurement of the Residual Stresses around a Cold Expanded Hole in an EN8 Steel Plate using the Contour Method'. Materials Science Forum 2002:404/407:527-534.
  27. M. E. Fitzpatrick, J. E. Moffatt, A. Dubois, F. Gregoire and A. D. Tarrant. ‘The influence of heat treatment processes on the fatigue performance of particle-reinforced aluminium alloys'. Mater. Sci. Technol . 2002:18(12):1453-1457.
  28. F. Ghanem, C. Braham, M. E. Fitzpatrick and H. Sidhom. ‘The effect of residual stress and microstructure modification from machining on the fatigue endurance of a tool steel'. J. Mater. Engng Performance 2002:11(6):631-639.
  29. J. R. Santisteban, L. Edwards, M. E. Fitzpatrick, A. Steuwer and P. J. Withers. ‘Engineering applications of Bragg edge neutron transmission'. Appl. Phys. A . 2002:74:S1433-S1436.
  30. D. Stefanescu, L. Edwards and M. E. Fitzpatrick. ‘Stress intensity factor correction for asymmetric through-thickness fatigue cracks at holes'. Intl J. Fatigue . 2003:25(7):569-576.
  31. A. Steuwer, J. R. Santisteban, P. J. Withers, L. Edwards and M. E. Fitzpatrick. ‘ In situ determination of stresses from time-of-flight neutron transmission spectra'. J. Appl. Cryst. 2003:36:1159-1168.
  32. D. Stefanescu, M. Dutta, D. Q. Wang, L. Edwards & M. E. Fitzpatrick. ‘The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes'. J. Strain Analysis for Engng Design , 2003:38(5):419-427.
  33. Y. Zhang, S. Ganguly, V. Stelmukh, M. E. Fitzpatrick and L. Edwards, ‘Validation of the Contour Method of Residual Stress Measurement in a MIG 2024-T351 Weld by Neutron and Synchrotron X-ray Diffraction'. J. Neutron Res ., 2003:11(4):181-185.
  34. M. J. Balart, A. Bouzina, L. Edwards and M. E. Fitzpatrick. ‘The Onset of Tensile Residual Stresses in Grinding of Hardened Steels', Mater. Sci. Engng , 2004:367A(1-2):132-142.
  35. A. Baczmanski, R. Levy-Tubiana, M. E. Fitzpatrick and A. Lodini. ‘Elastoplastic deformation of Al/SiC p metal matrix composite studied by self-consistent modelling and neutron diffraction'. Acta Mater , 2004:52:1565-1577.
  36. A. Baczmanski, R. Levy-Tubiana, M. E. Fitzpatrick and A. Lodini. ‘Phase stresses in Al/SiC p Metal Matrix Composite Determined by Modelling and Neutron Diffraction'. J. Neutron Res. , 2004:12(1-3):5-8.
  37. M. Dutta, G. Bruno, L. Edwards and M. E. Fitzpatrick, ‘Neutron Diffraction Measurement of the Internal Stresses following Heat Treatment of a Plastically-Deformed Al/SiC Particulate Metal-Matrix Composite', Acta Mater. 2004:52(13):3881-3888.
  38. S. Ganguly, V. Stelmukh, M. E. Fitzpatrick, and L. Edwards, ‘Usage of Neutron and Synchrotron X-Ray Diffraction for Non-Destructive Evaluation of Weld Residual Stresses in Aluminium Alloys'. J. Neutron Res ., 2004:1-3:225-231.
  39. B. Nadri, L. Edwards, M. E. Fitzpatrick and A. Lodini, ‘Measurement of residual stresses following overloading of cold expanded holes using the X-ray diffraction technique and finite element method'. J. Neutron Res ., 2004:12(1-3):219-224.
  40. L. C. R. Schneider, M. E. Fitzpatrick, M.R. Daymond, S. V. Hainsworth and A. C. F. Cocks. ‘Measurement of Residual Stress in a Powder Metallurgy Aluminium-SiC Composite'. J. Neutron Res. , 2004:12(1-3):129-133.
  41. D. Stefanescu, J. R. Santisteban, L. Edwards and M. E. Fitzpatrick. ‘Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes'. J. Aerospace Engng , 2004:17(3):91-97.
  42. D. Stefanescu, A. Steuwer, R. A. Owen, B. Nadri, L. Edwards, M. E. Fitzpatrick and P. J. Withers, ‘Elastic strains around cracked cold expanded fastener holes measured using the synchrotron X-ray diffraction technique'. J. Strain Analysis for Engng Design, 2004:39(5):459-469 This paper won the PE Publishing Award 2004 .
  43. Y. Zhang, S. Ganguly , L. Edwards and M. E. Fitzpatrick, ‘Cross-sectional Mapping of Residual Stresses in a Weld using the Contour Method', Acta Mater. , 2004:52(17):5225-5232.
  44. S. Ganguly, M. E. Fitzpatrick and L. Edwards, ‘Comparative Neutron and Synchrotron X-Ray Diffraction Studies to Determine Residual Stress on an As-Welded AA2024 Plate', Mater. Sci. Forum , 2004:490-1:223-228.
  45. L. Edwards, P. J. Bouchard, M. Dutta, D. Q. Wang, J. R. Santisteban, S. Hiller and M. E. Fitzpatrick, ‘Direct Measurement of the Residual Stresses Near a ‘Boat-Shaped' Repair in a 20mm Thick Stainless Steel Tube Butt Weld', Int. J. Pressure Vessels and Piping , 2004:82:288-298.
  46. L. C. R. Schneider, S. V. Hainsworth, A. C. F. Cocks and M. E. Fitzpatrick, ‘Neutron Diffraction Measurements in a Powder Metallurgy Component', Scripta Materialia , 2005:52(9):917-921.
  47. Y. Zhang, S. Pratihar , M. E. Fitzpatrick and L. Edwards, ‘Residual stress mapping in welds using the contour method', Mater. Sci. Forum , 2005:490-1:294-299.
  48. Y. Zhang, M. E. Fitzpatrick and L. Edwards. ‘Elastic-Plastic Analysis of Residual Stress around Cold-Expanded Fastener Hole in a Finite Plate'. Strain , 2005:41:59-70. This paper won the Fylde Electronics Best Paper Prize 2005.
  49. L. Edwards, M. E. Fitzpatrick, P. E. Irving, I. Sinclair, X. Zhang and D. Yapp, ‘An integrated approach to the determination and consequences of residual stress on the fatigue performance of welded aircraft structures', J. ASTM Intl , 2006:3(2).
  50. M. R. Daymond and M. E. Fitzpatrick, ‘Effect of Cyclic Plasticity on Internal Stresses in a Metal Matrix Composite', Metallurgical & Materials Transactions A , 2006:37A:1977-1986.
  51. M. E. Fitzpatrick, ‘Internal stress development during fatigue cycling of high-strength Al/SiC metal matrix composites', Materials Science Forum , 2006:524-525:769-774.
  52. S. Ganguly, M. E. Fitzpatrick and L. Edwards, ‘Use of neutron and synchrotron X-ray diffraction for evaluation of residual stresses in a 2024-T351 Aluminum Alloy Variable-Polarity Plasma-Arc weld', Metallurgical & Materials Transactions A , 2006:37A:411-420.
  53. M. Kartal, M. Turski, G. Johnson, M.E. Fitzpatrick, S. Gungor, P. J. Withers and L. Edwards, ‘Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method' , Materials Science Forum , 2006:524-525:671-676.
  54. A. Steuwer, L. Edwards, S. Pratihar, S. Ganguly, M. Peel, M. E. Fitzpatrick, J. Marrow, P. J. Withers, I. Sinclair, K.D. Singh, N. Gao and T. Buslaps, ‘In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction', Nuclear Instr. and Methods in Phys. Res. , 2006:246:217-225.
  55. M. L. Tan, M. E. Fitzpatrick and L. Edwards, ‘A Novel Closed-Form Calculation of the Stress Intensity Factor for a Crack in a Residual Stress Field', Materials Science Forum , 2006:524-525:83-88.
  56. S. Pratihar, V. Stelmukh, M. T. Hutchings, M. E. Fitzpatrick, U. Stuhr and L. Edwards, ‘ Measurement of the residual stress field in MIG-welded Al- 2024 & Al-7150 aluminium alloy compact tension specimens', Mater. Sci. Engng , 2006:437:46-53.
  57. M. Turski , S. Pratihar , L. Edwards, M. R. Daymond and M. E. Fitzpatrick, ‘ The Effect of Plastic Anisotropy on a 316L Stainless Steel Bead-on-Plate Specimen' , Materials Science Forum , 2006:524-525:679-684.
  58. K. Wierzbanowski, S. Wronski, A. Baczmanski, M. Wróbel, C. Braham, M. Fitzpatrick and A. Lodini, ‘Residual stresses induced by cross-rolling' , Materials Science Forum , 2006:524-525:63-68.
  59. M. L. Tan, M. E. Fitzpatrick, L. Edwards, ‘Stress Intensity Factors for Through Thickness Cracks in a Wide Plate Under Arbitrary Stress Field: Derivation and Application to Weld Residual Stress Fields' Engng Fract. Mech , 2007:74:2030-2054.
  60. S. D. A. Lawes, M. E. Fitzpatrick, S. V. Hainsworth, “The Impact of Surface Engineering on Engine Tribology”, Journal of Physics D: Applied Physics , 2007:40:5427-5437
  61. M. Kartal, R. Molak, M.Turski, S. Gungor, M. E. Fitzpatrick, L. Edwards, ‘ Determination of Weld Metal Mechanical Properties Utilising Novel Tensile Testing Methods', Applied Mechanics and Materials , 2007:7-8:127-132.
  62. S. V. Hainsworth, M. E. Fitzpatrick, “ Forensic Engineering: Applying materials and mechanics principles to the investigation of product failures”, Forensic Science, Medicine and Pathology , 2007:3(2):81-92.
  63. S. Pratihar, S. Ganguly, J. A. James, M. E. Fitzpatrick, L Edwards, ‘ Non-destructive Determination of the 3D Residual Stress in a AA7050 Upper Wing Skin Stringer Panel using Neutron Diffraction', J. Neutron Research , 2007:15(2):175-183.
  64. S. Ganguly , S. Pratihar , M. E. Fitzpatrick, L. Edwards, ‘Study of Residual Stress Distribution in a Stainless Steel Bead-on-Plate Simulation Benchmark Sample', Materials Science Forum , 2008:571-2:367-373.
  65. C. D. M. Liljedahl, M. E. Fitzpatrick, L. Edwards, ‘ Distortion and residual stresses in structures reinforced with titanium straps for improved damage tolerance'. Mater. Sci. Engng, 2008:486:104-111
  66. M. Rahman, M.E. Fitzpatrick, L. Edwards, S. Pratihar, M. Peel, A, Steuwer, T. Buslaps, ‘Investigation of the stress fields around a fatigue crack in aluminium alloy 5091', Materials Science Forum , 2008, 571-2, 119-124.
  67. L. Edwards, M. C. Smith, M. Turski, M. E. Fitzpatrick, P. J. Bouchard, ‘ Role of advanced residual stress modeling and measurement in structural integrity assessment of welded thermal power plant', Advanced Materials Research , 2008:41-42:391-400.
  68. S. Sharma, M. Turski, M. E. Fitzpatrick, L. Edwards, ‘Study of Elasto-plastic Anisotropic Response of Stainless Steel Weld Metal Using Neutron Diffraction', Materials Science Forum , 2008:571-2:125-130.
  69. C. D. M. Liljedahl, J. F. Tan, O. Zanellato, S. Ganguly, M. E. Fitzpatrick, L. Edwards, ‘Evolution of residual stresses with fatigue loading and subsequent crack growth in a welded aluminium alloy middle tension specimen', Engng Fracture Mechanics , 2008:75:3881-3894.
  70. S. Ganguly, V. Stelmukh, L. Edwards, M. E. Fitzpatrick, ‘Measurement of residual stresses in MIG-welded Al-2024 using neutron and synchrotron X-ray diffraction'. Mater. Sci. Engng . 2008:491:1-2:248-257 .
  71. N. J. Uhure, M. E. Fitzpatrick & S. V. Hainsworth, ‘The Effect of Substrate Surface Roughness on the Mechanical Properties of Diamond-Like Carbon Coatings', Tribology – Materials, Surfaces and Interfaces , 2007:1(4):211-223.
  72. C. D. M. Liljedahl, O. Zanellato, L. Edwards , M.E. Fitzpatrick, ‘Evolution of Residual Stresses with Fatigue Crack Growth in a VPPA-Welded Aluminium Alloy Compact Tension Specimen', Metall. Mater. Trans. , 2008:39(10):2370-2377.
  73. O. Zanellato , M. E. Fitzpatrick, M. R. Daymond, L. Edwards, M. Turski, ‘Development of intergranular stresses during in-situ compression tests in Zircaloy-4', Materials Science Forum , 2008:571-2:149-154.
  74. M. E. Kartal, C. D. M. Liljedahl, S. Gungor, L. Edwards, M. E. Fitzpatrick, ‘Determination of the Profile of the Complete Residual Stress Tensor in a VPPA Weld Using the Multi-Axial Contour Method', Acta Mater ., 2008:56:4417-4428.
  75. C. D. M. Liljedahl, M. E. Fitzpatrick, L. Edwards, ‘Residual stresses in structures reinforced with adhesively bonded straps for fatigue crack growth retardation', J. Composite Structures , 2008:86:344-355.
  76. back to the top^


Refereed Journal Articles in Press

  1. K. Wierzbanowski, S. Wronski , A. Baczmanski, M. Wróbel, M. Fitzpatrick, C. Braham and A. Lodini, “Variation of Residual Stresses during Cross-Rolling”, Journal of Neutron Research .
  2. C. D. M. Liljedahl, O. Zanellato, J. F. Tan, S. Ganguly, J. Brouard, J. Lin, P. E. Irving, X. Zhang, M. E. Fitzpatrick, and L. Edwards, ‘Weld residual stress effects on the damage tolerance of a 2024 aluminium airframe alloy', Intl. J. Fatigue .
  3. N. Barry, S. V. Hainsworth, M. E. Fitzpatrick, “Effect of Shot Peening on the Fatigue Behaviour of Cast Magnesium A8” Mater. Sci. Engng .

Refereed Journal Articles submitted

  1. M. L. Tan, S. Pratihar, M. E. Fitzpatrick & L. Edwards, ‘ Residual Stress Redistribution at Fatigue-Aged StressWave Cold-Worked Holes', submitted to J. Neutron Research .
  2. S. D. A. Lawes, M. E. Fitzpatrick, S. V. Hainsworth, ‘ On the Relationship Between Mechanical and Tribological Properties of DLC and Performance in Automotive Engine Applications', submitted to Surface Coatings Technol. , 2008.
  3. S. V. Hainsworth, M. E. Fitzpatrick, ‘ Characterization of the impact response of diamond-like carbon coatings', submitted to Surface Coatings Technol. , 2008.
  4. M. K. Khan, S. V. Hainsworth, L. Edwards, M. E. Fitzpatrick, ‘ Application of the Work of Indentation Approach for the Characterization of Aluminium 2024-T351 and Al Cladding by Nanoindentation ', submitted to J. Mater. Sci., 2008.

back to the top^

Refereed Conference Articles

  1. M. E. Fitzpatrick, P. J. Withers, A. Baczmanski, M. T. Hutchings, R. Levy, M. Ceretti and A. Lodini. ‘Effect of Plastic Flow on the Thermal Mismatch Stress in an Al/SiCp Metal Matrix Composite', in Fourth European Conference on Residual Stresses, Vol. 2. S. Denis, J.-L. Lebrun, B. Bourniquel, M. Barral and J.-F. Flavenot, Eds. ENSAM, Paris , 1996, pp. 961-970.
  2. M. R. Watts, P. J. Withers, A. M. Korsunsky and M. E. Fitzpatrick. ‘X-ray and Neutron Diffraction Measurement of Micro and Macrostresses in Metal Matrix Composites', in Fourth European Conference on Residual Stresses , Vol. 2. S. Denis, J.-L. Lebrun, B. Bourniquel, M. Barral and J.-F. Flavenot, Eds. ENSAM, Paris , 1996, pp. 951-959.
  3. F. Turquier, P. Hairy, M. E. Fitzpatrick, L. Edwards, M. Ceretti and A. Lodini. ‘Stress Measurements in a Tool Steel Structure Coated with Plasma-Sprayed Zirconia', in MAT-TEC 97 . A. Lodini, Ed. IITT International, Gournay-sur-Marne, France, 1997, pp. 163-168.
  4. M. E. Fitzpatrick, L. Edwards, D. Q. Wang, J. S. Wright, M. Ceretti and A. Lodini. ‘Neutron Diffraction Measurement of Strains in AISI316 Welded Steel Structures', in MAT-TEC 97. A. Lodini, Ed. IITT International, Gournay-sur-Marne, France, 1997, pp. 327-332.
  5. M. E. Fitzpatrick, M. Dutta and L. Edwards. ‘Effect of Previous Plastic Deformation on Stresses after Fatigue of a Metal Matrix Composite', in MAT-TEC 97. A. Lodini, Ed. IITT International, Gournay-sur-Marne, France, 1997, pp. 281-286.
  6. D. F. McCormack, W. B. Rowe, X. Chen, A. Bouzina, M. E. Fitzpatrick and L. Edwards. ‘Characterizing the Onset of Tensile Residual Stresses in Ground Components', in 6th Intl Conf. on Residual Stresses , Vol. 1. Institute of Materials , UK , 2000, pp. 225-232.
  7. A. Steuwer, P. J. Withers, J. R. Santisteban, L. Edwards, M. E. Fitzpatrick, M. R. Daymond, M. W. Johnson and G. Bruno. ‘Neutron Transmission Spectroscopy: A Solution to the d 0 Problem?', in 6th Intl Conf. on Residual Stresses , Vol. 2. Institute of Materials , UK , 2000, pp. 1239-1246.
  8. M. E. Fitzpatrick, M. J. Kennard and C. J. Small. ‘Problems in Residual Stress Determination for Thick Components', in 6th Intl Conf. on Residual Stresses , Vol. 2. Institute of Materials , UK , 2000, pp. 939-946.
  9. L. Edwards, M. E. Fitzpatrick, M. R. Daymond, M. W. Johnson, G. A. Webster, N. P. O'Dowd, P. J. Webster and P. J. Withers. ‘ENGIN-X: A Neutron Stress Diffractometer for the 21st Century', in 6th Intl Conf. on Residual Stresses , Vol. 2. Institute of Materials , UK , 2000, pp. 1116-1123.
  10. D. Stefanescu, L. Edwards and M. E. Fitzpatrick, ‘Predicting Fatigue Crack Growth From Cold-Expanded Holes', in Fatigue 2002 , A. F. Blom, ed., Vol. 2. EMAS , UK , 2002, pp. 1231-1238.
  11. D. Bacon, J. Moffatt, L. Edwards, A. D. Tarrant & M.E. Fitzpatrick. ‘Metal Matrix Composites: In the Driving Seat', in The Engineering of Sport 5 , M. Hubbard, R. D. Mehta & J. M. Pallis, eds., International Sports Engineering Association, University of Sheffield, Vol. 2, pp. 216-222, 2004.
  12. P. R. Lewis and M. E. Fitzpatrick, ‘Intellectual Property Topics in Open University Distance-Taught Courses', in Proceedings of the International Conference ?on ?Innovation, Good Practice and Research ?in ?Engineering Education 2006 , S. Doyle & A. Mannis, eds., Higher Education Academy, ISBN 1-905-788-11-8, pp. 507-511, 2006.
  13. X. Zhang, P. E. Irving, L. Edwards, M. E. Fitzpatrick, I. Sinclair, J. Lin, D. Yapp, ‘The Influence of Residual Stress on Design and Damage Tolerance of Welded Aircraft Structures', in Structural integrity of advanced aircraft and life extension for current fleets – Lessons learned in 50 years after the Comet accidents; Proceedings of 23rd ICAF ; ISBN 3-932182-42-1, Ed C. Dalle Donne; pp 265-281, 2005.
  14. T. Finlayson, J. Griffiths, D. Viano, M. E. Fitzpatrick, E. C. Oliver and Q. Wang, ‘ The fracture strength of Si particles in tensile specimens of Sr-modified A356 castings', in Shape Casting: 2 nd International Symposium, Edited by P. N. Crepeau, M. Tiryakioglu & J. Campbell, ISBN 978-0-87339-660-8, pp 127.134; TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2007.

back to the top^

Refereed Conference Articles - Submitted

  1. S. Ganguly, M. Turski, M. E. Fitzpatrick, L. Edwards, M. C. Smith, P. J. Bouchard, ‘Full field measurement of plastic flow properties in a multi-pass austenitic stainless steel weld specimen’, submitted to PVP2008.
  2. R. Mizuno, K. Ogawa, S. Okido, R. Haigh, J. A. James, M. T. Hutchings, S. Ganguly, M. E. Fitzpatrick, A. Paradowska, ‘Residual stress measurement using neutron diffraction on girth-welded type 304 pipes with weld metal deposited up to half and full pipe thickness’, submitted to 8th International Symposium of the Japan Welding Society, 2008.

Non-refereed Conference Contributions

  1. M. E. Fitzpatrick, T. J. Downes, M. T. Hutchings, J. E. King, D. M. Knowles and P. J. Withers. ‘The Effect of Thermal Residual Stress Fields on Fatigue Crack Growth in Al/SiCp Metal Matrix Composites', in Ninth International Conference on Composite Materials , Vol. 1. A. Miravete, Ed. University of Zaragoza , 1993, pp. 642-649.
  2. M. E. Fitzpatrick, T. J. Downes, M. T. Hutchings, D. M. Knowles, J. E. King and P. J. Withers. ‘The Effect of Long-Range Thermal Residual Stress Fields on Fatigue Crack Growth in Al/SiCp Metal Matrix Composite Materials and Their Measurement by Neutron Diffraction', in Fourth International Conference on Residual Stresses . Society for Experimental Mechanics, Bethel , CT , 1994, pp. 559-568.
  3. A. M. Korsunsky, M. E. Fitzpatrick and P. J. Withers. ‘Neutron Diffraction Measurement and Modelling of Stresses Around Fatigue Cracks in Al/SiCp Composites', in Proc. 10 th Intl Conf. On Composite Materials , Vol. 1. A. Poursartip and K. Street, Eds. Woodhead Publishing Ltd., 1995, pp. 545-552.
  4. A. Baczmanski, K. Wierzbanowski, J. Tarasiuk, A. Lodini, R. Levy, M. Ceretti and M. E. Fitzpatrick. ‘Study of Second Order Stresses for Single and Two Phase Polycrystalline Materials', in Fifth Intl. Conf. on Residual Stresses , Vol. 1. T. Ericsson, M. Odén and A. Andersson, Eds. Univ. of Linköping, 1997, pp. 208-213.
  5. M. E. Fitzpatrick, L. Edwards, D. Q. Wang and C. Burdett. ‘Neutron Diffraction Study of the Effects of Vibrational Stress Relief', in Fifth Intl. Conf. on Residual Stresses , Vol. 2. T. Ericsson, M. Odén and A. Andersson, Eds. Univ. of Linköping, 1997, pp. 1090-1095.
  6. M. E. Fitzpatrick. ‘The Effect of Plasticity Caused by Cold Working on the Misfit Stresses in a Metal Matrix Composite', in Fifth Intl. Conf. on Residual Stresses , Vol. 2. T. Ericsson, M. Odén and A. Andersson, Eds. Univ. of Linköping, 1997, pp. 886-891.
  7. L. Edwards, P. J. Bouchard, M. Dutta and M. E. Fitzpatrick. ‘Direct Measurement of Residual Stresses at a Repair Weld in an Austenitic Steel Tube', in Integrity of High Temperature Welds . Professional Engineering Publishing, Bury St Edmunds , UK , 1998, pp. 181-191.
  8. R. Levy-Tubiana, M. Ceretti, A. Baczmanski, M. E. Fitzpatrick and A. Lodini. ‘Determination of Residual Stresses in Metal Matrix Composites', in Proc. 6th Intl. Conf. on Composites Engng . D. Hui, Ed. 1999, pp. 477-8.
  9. D. Stefanescu, M. E. Fitzpatrick and L. Edwards. ‘On the Stress Analysis of Cold Expanded Fastener Holes'. Buletinul Universitatii "Petrol-Gaze" Ploiesti 1999:LI-1999(2):167-172.
  10. M. Dutta, G. Bruno, L. Edwards and M. E. Fitzpatrick. ‘Internal Stress Changes Measured by Neutron Diffraction in a Metal Matrix Composite after Mechanical and Thermal Treatments', in Proc. 6th Intl. Conf. on Composites Engng . D. Hui, Ed. 1999, pp. 195-6.

Other Works

Edited journals

  1. Associate Editor, Texture, Stress and Microstructure, Hindawi Publishing Corporation, ISSN 1687-5397.
  2. Member of editorial board for International Journal of Forensic Engineering, Inderscience Publishers, ISSN 1744-9944.
  3. Guest editor (with A. Lodini) for special issue of Journal of Neutron Research, Vol. 9 Issues 2-4, 2001.
  4. Guest editor (with P. J. Withers, M. R. Daymond, G. Bruno, S. Edwards, A. Korsunsky, A. Lodini, A. Sherry & A. Steuwer) for special issues of Journal of Neutron Research, Vol. 11 Issue 4, 2003, and Vol. 12 Issues 1-3 2004.

back to the top^

Other publications and Technical Reports

Other publications and technical reports
  1. M. E. Fitzpatrick & L. Edwards, ‘Ferrybridge C LP Turbine Blade Tip Shields’, Consultancy report for Powergen, 1997.
  2. M. E. Fitzpatrick, M. J. Kennard and C. J. Small. ‘Problems in Residual Stress Determination for Thick Components’. Report ISSU 92748, Rolls-Royce plc, 2000.
  3. J. R. Santisteban, M. E. Fitzpatrick, L. Edwards, A. Steuwer, P. J. Withers, M. R. Daymond, N. J. Rhodes and E. M. Schooneveld. ‘Engineering applications of Bragg edge neutron transmission’. ISIS Annual Report 2000-1, RAL-TR-2001-050, Council for the Central Laboratory of the Research Councils, 2001.
  4. M. E. Fitzpatrick, A. T. Fry, P. Holdway, F. A. Kandil, J. Shackleton, L. Suominen. Measurement Good Practice Guide No. 52: Determination of Residual Stresses by X-Ray Diffraction, National Physical Laboratory, Teddington, UK, ISSN 1473-2734, 2002.
  5. M. E. Fitzpatrick, ‘Cracking in forged MMC component, Consultancy report for Dunlop Aerospace, 2003.
  6. M. E. Fitzpatrick, ‘Microscopy of fracture toughness samples’, Consultancy report for Dunlop Aerospace, 2003.
  7. M. E. Fitzpatrick, ‘Shear strength measurements from Al-SiC MMC forgings', Consultancy report for Dunlop Aerospace, 2003.
  8. M. E. Fitzpatrick & D. H. Bacon, ‘Shear strength measurements from a range of Al-SiC MMC forged plates fabricated with different conditions', Consultancy report for Dunlop MMC, 2004.
  9. D. H. Bacon, L. Edwards & M. E. Fitzpatrick, ‘Mechanical property measurements from steel-based MMCs, Consultancy report for Goodrich Aerospace, 2004.
  10. M. E. Fitzpatrick, A. T. Fry, P. Holdway, F. A. Kandil, J. Shackleton, L. Suominen. Measurement Good Practice Guide No. 52: Determination of Residual Stresses by X-Ray Diffraction – Issue 2 , National Physical Laboratory, Teddington , UK , ISSN 1744-3911, 2005.
  11. S. Ganguly, M. E. Fitzpatrick, ‘Residual stresses in automotive engine components', Consultancy for Finnveden Powertrain, 2007.
  12. A. J. H. Goddard, C. C. Pain, D. Laurence, M. A. Cotton, R. Grimes, B. Marsden, M. E. Fitzpatrick, L. Edwards, R. W. K. Allen, ‘Safety & Performance for Innovative Reactors', Nuclear Future , 2007:3(5);257-268. This paper won the Institution of Nuclear Engineers Pinkerton Prize 2008.
  13. A. H. Sherry, A. F. Carley, F. Cegla, M. E. Fitzpatrick, B. J. Marsden, D. J. Smith, ‘The remote monitoring and the reliable prediction of materials performance in nuclear applications', Nuclear Future , 2007:3(5);230-240.
  14. C. D. M. Liljedahl, O. Zanellato, M. E. Fitzpatrick, L. Edwards, D. J. Hughes, ‘Evolution of weld residual stresses with in situ fatigue loading and crack growth', ILL Annual Report 2007 , Institut Laue-Langevin, 2007.
  15. R. John, D. Pulling et al. , ‘Materials Education and Skills: A Wake-Up Call', Materials UK Education and Skills Review , MatUK Ltd, 2008.

back to the top^