The Open University skip to content Accessibility

Materials Engineering
 

 

Research>Publications>Prof. John Bouchard

Publications - Prof. John Bouchard

Edited Book

Journal Papers (refereed)

Conference Contributions (refereed)

Conference Contributions (not refereed)

 

Edited Book

  1. Bouchard PJ . Section II.7 Treatment of weld residual stresses. In: Budden PJ, ed. R6 Revision 4, Assessment of the integrity of structures containing defects. Gloucester , UK : British Energy Generation Ltd, 2004.
  2. Bouchard PJ . Section IV.4 Appendix IV.4.2, More realistic level 3 weld residual stress profiles for austenitic stainless steel pipe butt welds. In: Budden PJ, ed. R6 Revision 4, Assessment of the integrity of structures containing defects. Gloucester , UK : British Energy Generation Ltd, 2004.
  3. Bouchard PJ . Residual stresses in lifing and structural integrity assessment. In: Buschow KHJ, ed. Encyclopaedia of Materials Science and Technology. Oxford : Pergamon, 2001.
  4. Bouchard PJ , Sharples JK, Chivers T. Appendix 9, Leak before break procedure. In: Ainsworth R, A, ed. R/H/R6 Revision 3 Assessment of the integrity of structures containing defects. Gloucester , UK : Nuclear Electric, 1997.

Academic Journal Papers (refereed)

  1. Bouchard PJ . Code characterisation of weld residual stress levels and the problem of innate scatter. Int J Pressure Vessels Pip 2008;85:152-165.
  2. Withers PJ, Turski M, Edwards L, Bouchard PJ , Buttle D, J. Recent advances in residual stress measurement. Int J Pressure Vessels Pip 2008;85:118-127.
  3. Bouchard PJ . Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds. Int J Pressure Vessels Pip 2007;84:195-222.
  4. Lee KS, Moreton DN, Bouchard PJ , Moffat DG. The post-yield behaviour of an internally pressurised cylinder having a pad attachment. Strain 2006;42:305-314.
  5. Daymond MR, Bouchard PJ . Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures. Metall Mater Trans A-Phys Metall Mater Sci 2006;37A(6):1863-1873.
  6. Hossain S, Truman CE, Smith DJ, Bouchard PJ . Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. J Press Vessel Technol - Trans ASME 2006;128(3):420-426.
  7. Bouchard PJ . Special issue on residual stresses at repair welds. Int J Pressure Vessels Pip 2005;82(4):243-243.
  8. Elcoate CD, Dennis RJ, Bouchard PJ , Smith MC. Three dimensional multi-pass repair weld simulations. Int J Pressure Vessels Pip 2005;82(4):244-257.
  9. Edwards L, Bouchard PJ , Dutta M, Wang DQ, Santisteban JR, Hiller S, Fitzpatrick ME. Direct measurement of the residual stresses near a 'boat-shaped' repair in a 20 mm thick stainless steel tube butt weld. Int J Pressure Vessels Pip 2005;82(4):288-298.
  10. Dong P, Hong JK, Bouchard PJ . Analysis of residual stresses at weld repairs. Int J Pressure Vessels Pip 2005;82(4):258-269.
  11. Bouchard PJ , George D, Santisteban JR, Bruno G, Dutta A, Edwards L, Kingston E, Smith DJ. Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs. Int J Pressure Vessels Pip 2005;82(4):299-310.
  12. Turski M, Sherry AH, Bouchard PJ , Withers PJ. Residual stress driven creep cracking in Type 316 stainless steel. Journal of Neutron Research 2004;12(1):45-49.
  13. Bouchard PJ , Withers PJ. The appropriateness of residual stress length scales in structural integrity. Journal of Neutron Research 2004;12(1):81-91.
  14. Bouchard PJ , Withers PJ, McDonald SA, Heenan RK. Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel. Acta Mater 2004;52(1):23-34.
  15. Bouchard PJ , Treimer W, Fiori F. Characterisation of creep cavitation damage in a stainless steel pressure vessel using small angle neutron scattering. Applied Physics A - Materials Scince & Processing 2002;74:S1689-S1691.
  16. Dong P, Zhang J, Bouchard PJ . Effects of repair weld length on residual stress distribution. J Press Vessel Technol-Trans ASME 2002;124(1):74-80.
  17. Bouchard PJ , Goldthorpe MR, Prottey P. J-integral and local damage fracture analyses for a pump casing containing large weld repairs. Int J Pressure Vessels Pip 2001;78(4):295-305.
  18. George D, Bouchard PJ , Smith DJ. Evaluation of through wall residual stresses in stainless steel weld repairs. Materials Science Forum 2000;347-349:646-651.
  19. Smith DJ, Bouchard PJ , George D. Measurement and prediction of residual stresses in thick-section steel welds. J Strain Anal Eng Des 2000;35(4):287-305.
  20. Edwards L, Santisteban JR, Stelmukh V, Bouchard PJ , Daymond MR. Measurement of the residual stresses near a short 20 o repair in a 19 mm thick stainless steel pipe girth weld. Journal of Neutron Research 2000;9(2/4):173-180.

back to the top^

Conference contributions (Refereed)

  1. Bouchard PJ . Characterising weld residual stress for high temperature assessment. 3rd International Conference on High Temperature Welds London : IoM, 2007, pp. 57-76.
  2. Turski M, Bouchard PJ , Withers PJ. Residual stress driven creep cracking of pressure vessel steels. 3rd International Conference on High Temperature Welds. London : IoM, 2007, pp. 323-332.
  3. Turski M, Bouchard PJ , Smith MC, Edwards L. Spatially resolved materials property data from a cross-weld tensile test. ASME PVP2007-26613. San Antonio , Texas American Society of Mechanical Engineers, New York , 2007.
  4. Nadri B, Bouchard PJ , Truman CE, Smith DJ. Statistical analysis of experimental and numerical weld residual stresses. ASME PVP2007-26265. San Antonio , Texas : American Society of Mechanical Engineers, New York , 2007.
  5. Hossain S, Truman CE, Smith DJ, Bouchard PJ . Measurement of residual stresses in a nozzle-to-cylinder weld after thermal ageing at 550°C. ASME PVP2007-26263. San Antonio , Texas American Society of Mechanical Engineers, New York , 2007.
  6. Bouchard PJ , Withers PJ. Identification of residual stress length scales in welds for fracture assessment. In: Youtsos AG, ed. Residual stress and its effects on fatigue and fracture, Proceedings of a Special Symposium held within the 16th European Conference on Fracture - ECF16, Alexandroupolis , Greece , Part 4: Springer Netherlands, 2006, pp. 163-176.
  7. Turski M, Edwards L, James J, Bouchard PJ , Smith MC, Withers PJ. Residual stress measurement within a single pass groove weld specimen utilising neutron diffraction and the contour method. ASME PVP2006-ICPVT-11-93991. Vancouver , Canada American Society of Mechanical Engineers, New York , 2006.
  8. Bouchard PJ , Edwards L, Youtsos AG, Dennis RJ. Development of a residual stress simulation benchmark for a single bead-on-plate benchmark. ASME PVP2006-ICPVT-93763. Vancouver , Canada American Society of Mechanical Engineers, New York , 2006.
  9. Smith MC, Bouchard PJ , Goldthorpe MR, Lawrjaniec D. Fracture margins for growing cracks in weld repairs. ASME PVP2005. Denver , United States : American Society of Mechanical Engineers, New York , 2005, pp. 371-383.
  10. Bouchard PJ , Santisteban JR, Edwards L, Turski M, James J, Pratihar S, Withers PJ. Residual stress measurements revealing weld bead start and stop effects in single and multi-pass weld-runs. ASME PVP2005. Denver , United States : American Society of Mechanical Engineers, New York , 2005, pp. 853-860.
  11. Boucher C, Bouchard PJ , Brown TB, Dauda TA, Hein H, Lawrjaniec D, Smith DJ, Truman CE, Ohms DC, Smith MC, Youtsos AG, Cardamone D. Management of nuclear power plant operation by optimising weld repairs - ENPOWER project overview. ASME PVP2005. Denver , USA : American Society of Mechanical Engineers, New York , 2004.
  12. Hossain S, Truman CE, Smith DJ, Bouchard PJ . Measurement of residual stresses in a type 316H stainless steel offset repair in a pipe girth weld. ASME PVP2004. San Diego , United States : American Society of Mechanical Engineers, New York , 2004, pp. 3-8.
  13. Elcoate CD, Dennis RJ, Bouchard PJ , Smith MC. 3-dimensional repair weld simulations - bead sequencing studies. ASME PVP2004. San Diego , USA : American Society of Mechanical Engineers, New York , 2004, pp. 9-17.
  14. Elcoate CD, Dennis RJ, Bouchard PJ , Smith MC. 3-Dimensional repair weld simulations. 2nd International Conference on Integrity of High Temperature Welds. London : IoM Communications, 2003, pp. 207-215.
  15. Sherry AH, Turski M, Wilkes MA, Beardsmore DW, Withers PJ, Bouchard PJ . The development of a compact specimen to study the influence of residual stresses on fracture. FESI 6th International Conference on Engineering Structural Integrity Assessment. Manchester , 2002.
  16. Lee KS, Moreton DN, Bouchard PJ , Moffat DG. The limit pressure for a cracked branch junction and comparison with a cracked plain cylinder. ASME PVP2002. Vancouver , Canada : American Society of Mechanical Engineers, New York , 2002, pp. 35-43.
  17. Bouchard PJ , Bradford RAW. Validated axial residual stress profiles for fracture assessments of austenitic stainless steel pipe girth welds. ASME PVP2001. Atlanta , USA : American Society of Mechanical Engineers, New York , 2001, pp. 93-99.
  18. Hutchings MT , Withers PJ, Bouchard PJ . Characterisation of the residual stress state in a double V' stainless steel cylindrical weldment using neutron diffraction and finite element simulation. ICRS6. Oxford , UK , 2000, pp. 1333-1340.
  19. Edwards L, Bruno G, Dutta M, Bouchard PJ , Abbott KL, Lin Peng R. Validation of residual stress predictions for a 19mm thick J-preparation stainless steel pipe girth weld using neutron diffraction. ICRS6. Oxford , UK , 2000, pp. 1519-1526.
  20. Bouchard PJ , Bate SK, George D, Youtsos AG, Leggatt RH. Thermal relaxation of residual stresses in thick section Type 316 stainless steel girth welds. ICRS6. Oxford , UK , 2000, pp. 972-979.
  21. Bate SK, Bouchard PJ . Measurement and modeling of residual stresses in thick-section Type 316 stainless steel welds. ICRS6. Oxford , UK , 2000, pp. 1511-1518.
  22. George D, Smith DJ, Bouchard PJ . Evaluation of through wall residual stresses in stainless steel weld repairs. ECRS 5: Proceedings of the Fifth European Conference on Residual Stresses. Zurich-Uetikon: Trans Tech Publications Ltd, 2000, pp. 646-651.
  23. Edwards L, Bouchard PJ , Dutta M, Fitzpatrick ME. Direct measurement of residual stresses at a repair weld in an austenitic steel tube. Integrity of High Temperature Welds. Nottingham : PEP Ltd, 1998, pp. 181-191.
  24. Bouchard J , Holt P, Smith D. Prediction and measurement of residual stresses in a thick section stainless steel weld. ASME PVP1997. Orlando , USA : ASME, New York , 1997, pp. 77-82.
  25. Dong P, Rahman S, Wilkowski G, Brickstad B, Bergman M, Bouchard J , Chivers T. Effects of weld residual stresses on crack-opening area analysis of pipes for LBB applications. ASME PVP1996. Montreal , Can: ASME, New York , NY , USA , 1996, pp. 89-102.
  26. Sharples JK, Bouchard PJ . Assessment of crack opening area for leak rates. LbB95. Lyons , France , 1995.
  27. Bouchard PJ . Practical applications of the R6 leak before break procedure. LbB95. Lyons , France , 1995.

Conference contributions (Not Refereed)

  1. Bouchard PJ . Weld residual stress, reheat cracking and repairs. Materials Performance Centre Seminar. University of Manchester , 2005.
  2. Bouchard PJ , Soanes TPT. Residual stress and integrity management issues in power plant. I MechE Seminar: Post weld heat treatment and management of residual stress. London : IMechE, 2005.
  3. Bouchard PJ , Steuwer A, Smith MC, Warren A. Measurement of residual stresses in a welded beam specimen using energy-dispersive synchrotron diffraction for validating a 3-D autogenous weld simulation. FaME_38 Seminar: Engineering Applications of Neutrons & Synchrotron Radiation ESRF Grenoble , 2004.
  4. Elcoate CD, Bouchard PJ , Smith MC. 3-dimensional repair weld simulations bead on plate comparisons. ABAQUS Users' Conference, 2003.
  5. Smith DJ, George D, Bouchard PJ , Watson C. Measurement and prediction of residual stresses in thick section welds. IMechE Seminar - Recent Advances in Welding Simulation. London : I Mech E, 1999.

 

back to the top^