The Open University skip to content Accessibility

Materials Engineering Group
 

 

Research>Publications>John Francis

Publications

Dr. John Francis

 

 

 

 

Refereed Journal Articles

  1. H. DAI, J.A. FRANCIS and P.J. WITHERS: “ Prediction of Residual Stress Distributions for Single Weld Beads Deposited on to SA508 Steel Including Phase-Transformation Effects”, Materials Science and Technology , In Press.
  2. J.A. FRANCIS, H.J. STONE, S. KUNDU, R.B. ROGGE, H.K.D.H. BHADESHIA, P.J. WITHERS and L. KARLSSON: “The Effects of Filler Metal Transformation Temperature on Residual Stresses in a High Strength Steel Weld”, Journal of Pressure Vessel Technology , 131 , 041401, 2009.
  3. J.A. FRANCIS, G.M.D. CANTIN, W. MAZUR and H.K.D.H. BHADESHIA: “Effects of Weld Preheat Temperature and Heat Input on Type IV Failure”, Science and Technology of Welding and Joining , 14 (5), 436-442, 2009.
  4. J.A. FRANCIS, M. TURSKI and P.J. WITHERS: “Measured Residual Stress Distributions for Low and High Heat-Input Single Weld Beads Deposited on to SA508 Steel ”, Materials Science and Technology , 25 (3) , 325-334, 2009.
  5. M. TURSKI, J.A. FRANCIS and P.J. WITHERS: “Determination of Residual Stress at Weld Interruptions by Neutron Diffraction”, Zeitschrift für Kristallographie , Supplement 27 , 231-243, 2008.
  6. H. DAI, J.A. FRANCIS, H.J. STONE, H.K.D.H. BHADESHIA and P.J. WITHERS: “Characterizing Phase Transformations and Their Effects on Ferritic Weld Residual Stresses with X-rays and Neutrons”, Metallurgical and Materials Transactions A , 39A (13), 3070-3078, 2008.
  7. J.A. FRANCIS, H.K.D.H. BHADESHIA and P.J. WITHERS: Review – “Welding Residual Stresses in Ferritic Power-Plant Steels”, Materials Science and Technology , 23 (9), 1009-1020, 2007.
  8. J.A. FRANCIS, W. MAZUR and H.K.D.H. BHADESHIA: Review – “Type IV Cracking in Ferritic Power Plant Steels”, Materials Science and Technology , 22 (12), 1387-1395, 2006.
  9. J.A. FRANCIS, B. BEDNARZ and R.T.DEAM: “Welding Parameters That Control Dilution in Hardfacing Overlays”, Australasian Welding Journal , 51 (1), 41-48, 2006.
  10. J.A. FRANCIS and G.M.D. CANTIN: “The Role of Defects in the Fracture of an Al-Si-Mg Cast Alloy”, Materials Science and Engineering A , 407 (1-2), 322-329, 2005.
  11. G.M.D. CANTIN and J.A. FRANCIS: “Arc Power and Efficiency in Gas Tungsten Arc Welding of Aluminium”, Science and Technology of Welding and Joining , 10 (2), pp. 200 – 210, 2005.
  12. J.A. FRANCIS, W. MAZUR and H.K.D.H. BHADESHIA: “Estimation of Type IV Cracking Tendency in Power Plant Steels”, ISIJ International , 44 (11), 1966 – 1968, 2004.
  13. J.A. FRANCIS: “Predicting Steady-State Dilution in Multi-Pass Hardfacing Overlays – Geometric Approach”, Science and Technology of Welding and Joining , 7 (5), pp. 331 – 338, 2002.
  14. J.A. FRANCIS, B. BEDNARZ and J.V. BEE: “Prediction of Steady-State Dilution in Multi-Pass Hardfacing Overlays Deposited by Self-Shielded Flux Cored Arc Welding”, Science and Technology of Welding and Joining , 7 (2), pp. 95 – 101, 2002.


back to the top^

Refereed Conference Articles

  1. J.A. FRANCIS, M. TURSKI and P.J. WITHERS: “Residual Stress Measurements in Autogenous SA508 Steel Welds”, Paper 61469, ASME Pressure Vessels and Piping Division Conference, Chicago , Illinois , July 27-31, 2008.
  2. A.P. WARREN, I. SYMINGTON, S.K. BATE, J.A. FRANCIS, M. TURSKI and P.R. HURRELL: “The Prediction of Residual Stresses in Autogenously Welded Ferritic Beams”, Paper 61509, ASME Pressure Vessels and Piping Division Conference, Chicago, Illinois, July 27-31, 2008.
  3. P.R. HURRELL, K. BRIDGER, P. BUNNEY, C. GILL, J.A. FRANCIS, M. TURSKI and S.K. BATE: “Design and Manufacture of Welded Plate Specimens for Residual Stress Experiments”, ASME Pressure Vessels and Piping Division Conference, Chicago , Illinois , July 27-31, 2008.
  4. J.A. FRANCIS, H.J. STONE, S. KUNDU, R.B. ROGGE, H.K.D.H. BHADESHIA, P.J. WITHERS and L. KARLSSON: “Transformation Temperatures and Welding Residual Stresses in Ferritic Steels”, Paper 26544, ASME Pressure Vessels and Piping Division Conference, San Antonio , Texas , July 22-26, 2007.
  5. S.K. BATE, A.P. WARREN, C.T. WATSON, P. HURRELL and J.A. FRANCIS: “ UK Reasearch Programme on Residual Stresses – Progress to Date”, Paper 26337, ASME Pressure Vessels and Piping Division Conference, San Antonio , Texas , July 22-26, 2007.
  6. J.A. FRANCIS, W. MAZUR and H.K.D.H. BHADESHIA: “Welding Procedures and Type IV Cracking Tendency – An Experimental Study”, 3 rd International Conference on Integrity of High Temperature Welds, IOM Communications Ltd. , London, 24-26 April, 2007.”
  7. J.A. FRANCIS, W. MAZUR and H.K.D.H. BHADESHIA: “Welding Procedures and Type IV Phenomena”, paper presented at the 7th International Conference on Trends in Welding Research , Pine Mountain , Georgia , USA , 16-20 May, 2005, ASM International .
  8.  

back to the top^

 

Non-refereed Conference Contributions

  1. H.K.D.H. BHADESHIA, J.A. FRANCIS, H.J. STONE, S. KUNDU, R.B. ROGGE, P.J. WITHERS and L. KARLSSON: “Transformation Plasticity in Steel Weld Metals”, pp. 171-180, Proceedings of the 10 th International Aachen Welding Conference, 22-25 October, 2007.
  2. J.A. FRANCIS, B. BEDNARZ and R.T. DEAM: “Welding Parameters That Control Dilution in Hardfacing Overlays”, 53 rd WTIA International Welding and Joining Research Conference, Darwin, Northern Territory, Australia, October, 2005.

 

back to the top^